P0A8D
14 Volt Power Module System Voltage Low
P0A8D reports too low a voltage at the 14 V power module (DC/DC converter feeding the 12 V network). GM uses it in its 2013 eAssist tables as the circuit-low check of the APM low-voltage sensor: if that sensor reads below 1 V for 1.5 s within a 2 s window while ignition voltage is 9 to 32 V, the code sets; it passes again above 1.5 V. It is Type B, two trips to MIL. Because a real 12 V network cannot be at 1 V with the ignition on, GM's version really points to an open or shorted voltage sense line or a failed sensor, not a flat battery. Other makers may apply the code to genuine undervoltage. P0A8E is the high counterpart, P0A8F the correlation check.
Possible causes
- Voltage sense line open or shorted to ground high
- Voltage sensor inside the power module failed medium
- Converter not delivering output (fuse, output cable) low
Symptoms
- MIL and charging/hybrid warning
- 12 V battery discharges
- Start/stop disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A8D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.