P0A8A
14 Volt Power Module Current Sensor A Circuit Intermittent
P0A8A covers short dropouts or jumps in the signal of the current sensor in the 14 V power module, the DC/DC converter that charges the 12 V battery in hybrids and EVs. The signal is valid most of the time but briefly leaves its range or changes faster than physically possible. No manufacturer documents this code publicly; GM's APM tables only show the hard limits for the same sensor (P0A88 below 0.5 A, P0A89 above 22.5 A or 45.25 A), which indicates what the intermittent check guards against. Loose terminals, chafed wiring near the module and vibration are the usual suspects. Compared with P0A88/P0A89 the fault often clears and returns, which makes freeze-frame data valuable.
Possible causes
- Loose or fretted terminals at the module connector high
- Chafed wiring with intermittent short or open medium
- Intermittent internal fault of the current sensor low
Symptoms
- Warning lamp that comes and goes
- Occasional 12 V voltage fluctuations
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0A8A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.