OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A88

14 Volt Power Module Current Sensor A Circuit Low

P0A88 reports that the current sensor of the 14 V power module (DC/DC converter feeding the 12 V system) reads too low while the converter should be delivering power. GM documents it for the Accessory Power Module: in the 2013 eAssist tables the input current must stay below 0.5 A for 1.5 s within a 2 s window while calculated output power is 0.25 to 1.5 kW; the 2016 tables use 0.50 A or less in 640 of 800 samples, enabled only when the APM is on, the hood is closed and the 12 V target is reached. Both rate it Type B, two trips to MIL. A short to ground, an open signal line or a dead sensor are typical; P0A89 is the opposite high fault, P0A87 the plausibility check.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 88

Possible causes

  • Sensor signal shorted to ground or open high
  • Current sensor in the power module failed medium
  • Corroded or loose module connector medium

Symptoms

  • MIL and hybrid/charging warning
  • 12 V battery not charged properly
  • Start/stop function may be disabled

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A88

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication