OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A83

Hybrid/EV Battery Pack Cooling Fan 1 Stuck On

P0A83 means battery cooling fan 1 keeps turning although the controller has switched it off. No manufacturer publicly documents this exact code. CARB asks for fan outputs to be checked for proper response to commands. GM shows the method under its sense code P0BC8: with the fan off for more than 20 s, a reported speed above 120 rpm counts as a fault. Likely causes are a control wire shorted to supply, a welded fan relay (GM files that as P0BC1) or a fan controller that ignores the command. The pack stays cool, but the fan drains the 12 V battery when parked and stays loud. Do not confuse it with P0A82 (fan too weak or off) or the circuit codes P0A81/P0A84/P0A85.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 83

Possible causes

  • Fan control wire shorted to supply voltage medium
  • Welded fan relay keeps power applied medium
  • Fan's internal speed controller ignores off command medium
  • Battery control module output stuck active low

Symptoms

  • Battery fan heard running with the vehicle off or idle
  • Discharged 12 V battery after parking
  • Hybrid or check engine warning

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0A83

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication