OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A82

Hybrid/EV Battery Pack Cooling Fan 1 Performance/Stuck Off

This code covers a fan 1 that is electrically intact but does not deliver the requested cooling, up to standing still. No manufacturer publishes code-exact criteria; CARB requires a functional check of battery cooling where feasible. Typical methods: GM compares commanded and fed-back fan speed (filed under its own sense code P0BC8), Toyota flags a fan whose feedback-corrected duty deviates too far from the expected value, and Honda compares expected and measured battery temperature rise. Causes are mostly mechanical: dust on the blades, a clogged intake filter, worn bearings. Circuit faults use P0A81/P0A84/P0A85; the stuck-on case is P0A83. The pack runs hotter and power may be limited.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 82

Possible causes

  • Dust or debris on fan blades or in the duct high
  • Clogged or covered battery air intake or filter high
  • Worn or seized fan motor bearings medium
  • Faulty fan speed feedback signal low

Symptoms

  • Hybrid warning or check engine light
  • Fan audibly weak or silent under load
  • Reduced electric assist in warm weather

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0A82

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication