OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A80

Replace Hybrid/EV Battery Pack

The battery controller has concluded that the pack is at end of life. In GM tables this is a resistance test: the maximum cell or pack resistance, measured from current and voltage swings, exceeds a temperature-dependent end-of-life threshold, and the code sets as Type A after one trip. Toyota bulletins for Prius (2004–09, 2013–15), Prius v and Camry Hybrid report P0A80, often together with P0A7F, caused by dust in the battery cooling fan; cleaning the fan comes first. Honda recalled the 2018 Accord Hybrid because software wrongly set this code as a permanent fault after pack replacement. Compared with P0A7F it is the final verdict; assist and economy drop and the MIL stays on.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 80

Possible causes

  • Cell or module resistance above end-of-life limit high
  • Clogged battery cooling fan or intake filter (Toyota) medium
  • Controller software misreading a replaced pack (Honda Accord Hybrid 2018) low

Symptoms

  • Check engine and hybrid system warning on
  • Noticeably weaker electric assist
  • Higher fuel consumption, engine runs more

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A80

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication