OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A7E

Hybrid/EV Battery Pack Over Temperature

The pack controller compares the hottest module temperature with a protection limit. GM sets P0A7E, mostly as Type A (MIL after one trip), when the maximum module temperature exceeds a program limit between about 61 and 73.5 °C, unless a temperature sensor fault is active. Subaru documents it on the 2014–16 Crosstrek Hybrid, where too strict logic for heat after shutdown cut assist and auto start-stop; GM links it on eAssist cars to a cooling fan that stops at low system voltage; Porsche saw it with implausible sensor signals on the 911 GTS T-Hybrid. Sensor circuit faults have their own codes (P0A9B–P0A9E). The car limits charge and discharge power to protect the cells.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 7E

Possible causes

  • Battery cooling fan inoperative or intake/filter clogged high
  • Battery controller software logic (update released by Subaru, Porsche) medium
  • Low 12 V system voltage stopping the cooling fan medium
  • Aged cells with high internal resistance heating up low

Symptoms

  • Hybrid system warning and check engine light
  • Reduced electric assist and regeneration
  • Auto start-stop no longer works
  • In rare cases warning with no-start

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A7E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication