P0A7C
Motor Electronics Over Temperature
P0A7C reports that the electronics controlling the hybrid motors, mainly the inverter, have run hotter than allowed. Ford uses the code on its hybrids and stores it in the PCM. A Ford bulletin for 2010-11 Fusion and Milan Hybrid and 2011 MKZ Hybrid built up to 9 September 2010 describes a wrench light with no drivability concern and P0A7C, cured by a PCM software update. Ford warranty statistics supplied to NHTSA list P0A7C as a recurring code on 2010-12 Escape, Tribute and Mariner Hybrid. Common physical causes are a failed coolant pump of the motor electronics cooling loop, low coolant, air in the loop or a blocked radiator. CARB requires monitoring of inverter thermal management. P0A3C and P0A3D cover the individual inverters. Power is reduced to protect the electronics.
Possible causes
- Coolant pump of the motor electronics cooling loop failed high
- Low coolant or air in the electronics cooling loop medium
- PCM calibration triggering the code without real overheating (Ford Fusion Hybrid) medium
- Blocked electronics radiator or faulty cooling fan low
Symptoms
- Wrench or hybrid warning light
- Reduced power, especially under high load or heat
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0A7C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.