P0A7B
Battery Energy Control Module Requested MIL Illumination
P0A7B is a request code: the battery energy control module, which has found an emissions-relevant fault of its own, asks the engine control module to switch on the MIL, and the engine controller stores P0A7B. The actual cause sits in a separate code in the battery module. GM documents this on the 2024-25 Corvette E-Ray: P0A7B in the K20 engine controller appears together with P0E3C in the battery module, caused by air trapped around the battery coolant pump after a repair; purging the air is the fix. Subaru reports P0A7B in the engine controller of the 2014 XV Crosstrek Hybrid alongside battery and drive motor codes after a frozen power relay. Diagnose the battery module codes first. P0AC4 is the matching request from the hybrid control module.
Possible causes
- Emissions-relevant fault stored in the battery energy control module high
- Air trapped at the battery coolant pump (Corvette E-Ray, with P0E3C) medium
- Frozen power supply relay of the drive motor control module (Subaru Crosstrek Hybrid) low
Symptoms
- MIL on
- Additional codes stored in the battery control module
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0A7B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.