OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A7A

Generator Inverter Performance

P0A7A reports that the inverter stage driving the generator has signalled a fault, for example overcurrent or a failed power switch. Toyota uses the code across its hybrids and splits it with information codes. Bulletin T-SB-0142-16 covers 2012-2016 Avalon, Camry and RAV4 Hybrid with MIL on and P0A7A plus information code 122, a generator inverter fail signal caused by overcurrent; the repair replaces inverter and transaxle. A Toyota field report filed with NHTSA describes a 2006 Highlander Hybrid with P0A7A sub code 325, master warning, MIL and Check Hybrid System, traced to a fault inside the inverter assembly. P0A78 and P0A79 are the drive motor inverters, P0A3E generator inverter overheating, P0A92 generator performance.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 7A

Possible causes

  • Internal generator inverter fault with overcurrent (Toyota information code 122) high
  • Inverter assembly defective high
  • Fault in the generator inside the transaxle medium
  • Insufficient inverter cooling stressing the power stage low

Symptoms

  • MIL, master warning and Check Hybrid System message
  • Reduced power or vehicle will not enter ready mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A7A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication