OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A79

Drive Motor B Inverter Performance

P0A79 is the drive motor B counterpart of P0A78: the inverter stage for motor B has detected a power-switch fault. In GM hybrid OBD tables the IGBT module reports a desaturation status on a high or low side switch of any phase; persisting for about 2 ms it sets P0A79 as Type A with MIL on the first trip. Stellantis documents P0A79 several times: on the 2021 Jeep Wrangler 4xe together with P0A78 and an engine-only limp mode, fixed by a new power inverter module; on the 2017 Pacifica Hybrid with improved hybrid control software, and with a loose high-voltage cable at the inverter terminal that also caused loss of propulsion. P0A78 is motor A, P0A7A the generator inverter, P0A3D overheating of inverter B. The driver loses electric drive.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 79

Possible causes

  • IGBT desaturation or short in the motor B power stage high
  • Power inverter module defective high
  • Loose high-voltage cable at the inverter terminal (Pacifica Hybrid) medium
  • Hybrid control software requiring update medium

Symptoms

  • MIL and hybrid system warning
  • No electric drive, engine-only operation
  • Loss of propulsion in severe cases

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A79

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication