P0A76
Generator Phase W Current Low
P0A76 signals that phase W of the hybrid generator conducts or reports too little current while the generator should be producing or absorbing torque. No manufacturer documents P0A76 publicly. Physically, the generator phase leads run from the inverter into the transaxle or engine bay, so a loose bolted terminal, a cracked lead or a corroded connector can open the W path; electrically, a sensor fixed near zero gives the same reading. A Caterpillar patent separates both: a sensor fault is assumed when one phase reads about zero while the sum of the three no longer balances. A Hyundai patent shows separate generator phase sensors in the inverter. CARB requires circuit monitoring. P0A77 is the high side, P0A70 and P0A73 phases U and V.
Possible causes
- Loose terminal, cracked lead or corroded connector in generator phase W high
- Generator phase W current sensor stuck near zero medium
- Open phase W winding in the generator low
Symptoms
- Hybrid warning and MIL
- Engine start harsh or delayed, charging reduced
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A76
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.