OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A75

Generator Phase W Current

P0A75 stands for a fault in the phase W current of the hybrid generator. Toyota documents it in practice: in a field report from an NHTSA investigation of 2006 Highlander Hybrid inverters, P0A75 appeared next to P0A72, the drive motor phase codes P0A60 and P0A63 and inverter performance codes, and the root cause was inside the inverter/converter, which was replaced. A sudden cluster like this points more to the shared inverter than to the generator winding. A Toyota patent shows how a control and a monitoring current sensor are cross-checked so that a defective sensor is caught before it causes overcurrent. P0A76 and P0A77 are the low and high variants, P0A6F and P0A72 phases U and V. Ready mode or drive may be lost.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 75

Possible causes

  • Internal fault in the inverter/converter assembly (Toyota Highlander Hybrid) high
  • Generator phase W current sensor failed medium
  • Generator phase W cable or connector faulty low

Symptoms

  • MIL and master warning, usually with other hybrid codes
  • Vehicle will not become ready or will not move

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A75

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication