OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A74

Generator Phase V Current High

P0A74 appears when phase V of the hybrid generator shows more current than its limit allows. No manufacturer documents P0A74 publicly. A drifting sensor zero point is one candidate: a Hyundai patent covering both the traction motor and the starter-generator corrects phase sensor offsets and flags a fault when the correction fails. Real overcurrent is the other, for example from a winding or insulation short or a power switch that no longer turns off; a Toyota patent explains why the inverter then shuts down quickly. CARB requires monitoring of electric drive components. P0A73 is the low side, P0A71 and P0A77 phases U and W, P0A72 the general code. The hybrid system typically stops, and in power-split hybrids the car may lose drive entirely.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 74

Possible causes

  • Phase V sensor offset drifted or offset correction failed medium
  • Power switch in the generator phase V leg not turning off medium
  • Winding or insulation short in generator phase V medium

Symptoms

  • Master warning or hybrid warning with MIL
  • Hybrid system shutdown, possibly no propulsion

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A74

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication