OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A73

Generator Phase V Current Low

P0A73 indicates that phase V of the hybrid generator delivers or reports too little current under load. No manufacturer documents P0A73 publicly. On inverters that measure only phases V and W, a low V reading has a knock-on effect: the calculated U current is wrong as well, so the generator torque control loses accuracy. A Caterpillar patent shows the logic for three-sensor systems, where a near-zero reading plus a violated zero-sum identifies the failed sensor; a Toyota patent compares a control sensor with a monitoring sensor and the current command. CARB requires circuit monitoring of electric drive components. P0A74 is the high side, P0A70 and P0A76 phases U and W, P0A72 the general code. Charging and engine start can suffer.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 73

Possible causes

  • Generator phase V current sensor reading near zero high
  • Generator phase V lead or terminal open medium
  • Phase V switch in the generator inverter not conducting low

Symptoms

  • Hybrid warning and MIL
  • Engine runs more often, battery charge does not recover

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A73

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication