P0A72
Generator Phase V Current
P0A72 reports a fault in the phase V current of the hybrid generator. Toyota uses it: a field report filed with NHTSA covers a 2006 Highlander Hybrid with the MIL on and P0A72 stored together with P0A75 for generator phase W, P0A60 and P0A63 for drive motor A, and inverter performance codes including P0A78; after checking connector fit and the resistance of the three-phase cables, the inverter/converter assembly was replaced. The pairing of V and W codes fits inverters that measure two phases and calculate the third, as a Hyundai patent describes for its starter-generator. P0A73 and P0A74 are the low and high cases, P0A6F and P0A75 phases U and W. Expect a hybrid warning and possibly no drive.
Possible causes
- Internal fault in the inverter/converter assembly (Toyota Highlander Hybrid) high
- Generator phase V current sensor failed medium
- Poor pin fit or damaged three-phase cable to the generator low
Symptoms
- MIL and master warning, several hybrid codes at once
- Vehicle may not move or enter ready mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A72
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.