P0A71
Generator Phase U Current High
P0A71 is set when the current in phase U of the hybrid generator exceeds its permitted level. No manufacturer documents P0A71 publicly. The Toyota patent on current sensor monitoring applies directly, since its machine also runs as an engine-driven generator and starts the engine: a sensor stuck too low makes the controller push the real current far above command, and an overcurrent through the inverter can damage its switches, so the relays are opened. A real overcurrent can also come from a winding or insulation short in the generator or a shorted switch. CARB requires monitoring of electric drive components. P0A70 is the low side, P0A74 and P0A77 phases V and W, P0A6F the general code. The hybrid system usually shuts down.
Possible causes
- Shorted power switch in the generator phase U leg medium
- Winding or insulation short in generator phase U medium
- Faulty phase U current sensor or its evaluation in the inverter medium
Symptoms
- Master warning or hybrid warning with MIL
- Hybrid system shuts down; vehicle may not move or restart
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A71
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.