P0A6F
Generator Phase U Current
P0A6F is the general fault code for the phase U current of the hybrid generator, the motor-generator that is mainly driven by the engine, starts it and charges the battery, such as Toyota's MG1 or Hyundai's hybrid starter-generator. No manufacturer documents P0A6F publicly; Toyota's published field reports show generator codes for phases V and W only. A Hyundai patent describes an inverter that senses two or three generator phase currents through its own sensors, separate from those of the drive motor. CARB requires monitoring of electric drive components. P0A70 and P0A71 are the low and high variants, P0A72 and P0A75 phases V and W, P0A59 the generator current sensor circuit. Without the generator, engine start and charging may fail.
Possible causes
- Generator phase U current sensor failed high
- Fault in the generator section of the inverter assembly medium
- Generator phase U cable or terminal faulty low
Symptoms
- Hybrid system warning and MIL
- Engine cannot be started electrically or battery is no longer charged
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A6F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.