P0A6E
Drive Motor B Phase W Current High
P0A6E indicates excessive current, measured or real, in phase W of drive motor B. No manufacturer documents P0A6E publicly. On the motor A side, Hyundai's 2017 Ioniq Hybrid campaign shows the typical real-world pattern: coolant leaking inside the traction motor set phase-high codes for U, V and W alongside a high-voltage isolation fault, with motor replacement once the leak is confirmed. A Toyota patent describes the protective logic: if current runs far above the command, the inverter is at risk, so the system stops switching and opens the relays. CARB requires monitoring of electric drive components. P0A6D is the low side, P0A68 and P0A6B the U and V phases, P0A65 motor A. Drive from motor B is lost until repair.
Possible causes
- Insulation breakdown or winding short in phase W (moisture, coolant) high
- Shorted switch in the phase W leg of the inverter medium
- Phase W current sensor reading too high low
Symptoms
- MIL and hybrid warning, possibly with an isolation fault
- Motor B no longer drives; possible air conditioning shutdown
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A6E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.