P0A6C
Drive Motor B Phase W Current
P0A6C covers a general fault in the phase W current of drive motor B. No manufacturer documents P0A6C publicly. Where motor B sits on a separate axle, its three high-voltage phase leads are long and exposed, so cable and terminal faults are a realistic cause; for the motor A phase codes P0A5D, P0A60 and P0A63, Audi blames welding variances in the high-voltage wiring of the 2021-23 Q5 e quattro. On the sensing side, a Caterpillar patent recognises a dead phase sensor by its near-zero reading combined with a violated zero-sum of the three currents. CARB requires circuit and plausibility checks of drive components. P0A6D and P0A6E are the low and high cases, P0A66 and P0A69 phases U and V, P0A63 motor A. Motor B is switched off.
Possible causes
- Phase W high-voltage lead or terminal to motor B damaged or loose high
- Phase W current sensor failed medium
- Internal fault of the motor B inverter medium
Symptoms
- Hybrid warning lamp and MIL
- Loss of electric drive on the axle driven by motor B
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A6C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.