P0A69
Drive Motor B Phase V Current
P0A69 flags a general fault in the current of phase V of drive motor B. No manufacturer documents P0A69 publicly. Phase V matters doubly on many inverters: a Hyundai patent describes designs that measure only two of the three phase currents and calculate the remaining one, so a faulty V reading also distorts the computed phase. A Caterpillar patent detects a failed sensor through the zero-sum rule of the three phase currents and can then estimate the missing value. CARB requires monitoring of electric drive components for circuit faults and plausibility. P0A6A and P0A6B are the low and high variants, P0A66 and P0A6C phases U and W, P0A60 the motor A equivalent. The driver sees a hybrid warning and motor B is taken out of service.
Possible causes
- Phase V current sensor of motor B failed high
- Fault on the motor B inverter board or power stage medium
- Phase V high-voltage cable or terminal loose or damaged low
Symptoms
- Hybrid system warning and MIL
- Reduced power, motor B no longer contributes
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A69
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.