P0A68
Drive Motor B Phase U Current High
P0A68 means the current measured in phase U of drive motor B rises above its plausible maximum, either because a real overcurrent flows, for example through damaged insulation, a winding short or a shorted power switch, or because the phase sensor reads too high. No manufacturer documents P0A68 publicly. For the motor A counterpart P0A5F, Hyundai links phase-high codes on the 2017 Ioniq Hybrid to coolant leaking inside the traction motor, together with an insulation fault. A Toyota patent explains why the inverter must react quickly: overcurrent loads the power switches and can destroy them, so the drive is cut. CARB requires monitoring of electric drive components. P0A67 is the low side, P0A6B and P0A6E cover V and W. Motor B is shut down.
Possible causes
- Winding short or insulation breakdown in phase U of motor B (e.g. coolant ingress) high
- Shorted power switch in the phase U leg of the inverter medium
- Phase U current sensor reading too high (gain or offset fault) medium
Symptoms
- Hybrid warning and MIL, often with an insulation fault code
- Sudden loss of drive from motor B
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A68
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.