OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A66

Drive Motor B Phase U Current

P0A66 is the general fault code for the current in phase U of drive motor B, the second electric machine of a two-motor hybrid or an electric rear-axle motor. No manufacturer documents P0A66 publicly; GM, for instance, only uses the open-phase code P0A67 for this phase. The checks behind such a code are described in patents: a Caterpillar patent declares a phase sensor failed when the three phase currents no longer add up to roughly zero, and a Hyundai patent shows inverters that measure two phases and calculate the third. CARB requires circuit and rationality monitoring of electric drive components. P0A67 and P0A68 are the low and high variants, P0A69 and P0A6C cover phases V and W, P0A5D is the same code on motor A. Motor B is normally shut off.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 66

Possible causes

  • Phase U current sensor of motor B failed (inside the inverter) high
  • Phase U high-voltage cable or terminal between inverter and motor B faulty medium
  • Internal fault in the motor B power stage medium
  • Winding fault in phase U of drive motor B low

Symptoms

  • Hybrid system warning and MIL
  • Motor B switched off, less power or no electric all-wheel drive

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A66

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication