P0A65
Drive Motor A Phase W Current High
P0A65 reports overcurrent in phase W of drive motor A. It is the third phase code in Hyundai bulletin 17-01-057-1 for the 2017 Ioniq Hybrid, campaign T2J: with an internal coolant leak in the traction motor, P0A65, P0A5F or P0A62 set with Check Engine and hybrid lights, often joined by the isolation fault P0AA6. Reduced power when accelerating and a non-working air conditioner followed. The fix path is the scan tool isolation test, a coolant inspection of the motor and, if confirmed, a new traction motor. In general, a W-phase winding short or a pinched cable has the same effect. Hyundai inverters measure two phases and calculate the third, per a Hyundai patent. P0A64 is the low side, P0A63 the general W code, P0A5F and P0A62 phases U and V.
Possible causes
- Internal coolant leak in the traction motor (Hyundai Ioniq Hybrid) high
- Phase W lead or winding shorted to ground or to another phase medium
- Inverter power stage fault in phase W medium
- Current sensor falsely reporting overcurrent low
Symptoms
- Check Engine and hybrid warning lights
- Reduced power when accelerating
- Air conditioning inoperative (Hyundai Ioniq Hybrid)
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A65
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.