P0A62
Drive Motor A Phase V Current High
P0A62 signals overcurrent in phase V of drive motor A. Hyundai lists it in bulletin 17-01-057-1 for the 2017 Ioniq Hybrid next to P0A5F, P0A65 and the isolation fault P0AA6: the bulletin traces them to coolant leaking inside the traction motor and checks the high-voltage insulation first. Check Engine and hybrid lights came on, acceleration weakened and the air conditioning stopped. The dealer first runs an isolation breakdown test with the scan tool, then checks the motor for coolant and replaces it if needed. A shorted turn or a damaged phase lead to ground gives the same picture on other vehicles. A Hyundai patent describes two measured phases with the third calculated. P0A61 is the low side, P0A60 the general V code, P0A5F and P0A65 phases U and W.
Possible causes
- Coolant inside the traction motor with loss of insulation (Hyundai Ioniq Hybrid) high
- Phase V lead or winding shorted to ground or to another phase medium
- Inverter power stage fault in phase V medium
Symptoms
- Check Engine and hybrid warning lights
- Weak acceleration, air conditioning inoperative
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A62
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.