OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A5E

Drive Motor A Phase U Current Low

P0A5E means too little current flows, or is sensed, in phase U of drive motor A, the classic sign of an open phase. GM describes the check for the motor control processor of the 2016 Chevrolet Volt and in its 2018 hybrid tables: with the inverter in normal PWM above 50 V and a squared current command above 900 A2 (2016) or 4,900 A2 (2018), the absolute U current is sampled while the rotor is within 30 degrees of the U phase axis; below 9 A for 0.4 s of a 0.6 s window, P0A5E sets as Type A, MIL on the first trip. Each phase is tested in turn as the rotor turns. A Caterpillar patent likewise spots a dead sensor by a phase reading near zero. P0A61 and P0A64 are phases V and W, P0A5F the high side, P0A5D the general U code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 5E

Possible causes

  • Open circuit in the phase U cable, connector or terminal high
  • Phase U current sensor reads zero medium
  • Phase U switch of the inverter not conducting medium
  • Open winding of phase U in drive motor A low

Symptoms

  • MIL and propulsion system warning
  • Rough or reduced electric drive, possible engine-only operation

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A5E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication