P0A5D
Drive Motor A Phase U Current
P0A5D concerns the current in phase U of drive motor A, as seen by the inverter. Audi documents it on the 2021-23 Q5 e quattro (bulletin 2069917/1): P0A5D00, often with P0A6000 and P0A6300, is stored in the electric drive control module J841, the cluster reads Drive system: fault and the car may not start or drive. The cause was variance in welding the high-voltage phase conductors; the fix is a resistance and wiggle test of each phase lead and a new motor harness. Many inverters do not measure U at all: a Hyundai patent measures two phases and calculates the third from the zero-sum rule, so a U fault can also stem from the V or W sensor. P0A5E/P0A5F are the low and high variants, P0A60 and P0A63 phases V and W.
Possible causes
- High-voltage phase cable or weld joint to drive motor A faulty (Audi Q5 e quattro) high
- Phase current sensor in the inverter failed medium
- Internal inverter fault medium
- Winding fault in phase U of drive motor A low
Symptoms
- Drive system fault message and MIL
- Vehicle does not start or the drive system cannot be activated
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A5D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.