P0A5C
Generator Current Sensor Circuit High
P0A5C means the generator current sensor output lies above its valid range, typically from an open sensor ground, a short to the sensor supply or a saturated sensor. No hybrid manufacturer documents P0A5C publicly with criteria. Patents describe how controllers of engine-driven generators and starter-generators supervise their current sensors: Toyota with a control and a monitoring sensor plus fixed signal limits, Hyundai with an offset check on the two measured phases from which the third is calculated. A falsely high reading makes the controller reduce generator torque or trip overcurrent protection. CARB requires out-of-range checks for hybrid input components. P0A5B is the low side, P0A59 the circuit fault, P0A5A plausibility, P0A58 the motor B counterpart.
Possible causes
- Sensor ground open or high resistance high
- Signal line shorted to the sensor supply medium
- Generator current sensor with saturated output medium
Symptoms
- Hybrid warning and MIL
- Generator disabled, engine start or battery charging affected
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A5C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.