OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A59

Generator Current Sensor Circuit

P0A59 is the general circuit fault of the current sensor on the hybrid generator, the electric machine driven by the engine that charges the battery and often starts the engine. Its inverter uses the current reading to control generator torque. No manufacturer documents P0A59 publicly with criteria. Patents describe the same sensing on generators: Toyota for a motor that also works as an engine-driven generator, Hyundai for the hybrid starter-generator, where two phases are measured and the third is calculated, and Caterpillar for generator and traction motor sensors. CARB requires circuit checks of hybrid input components. P0A5A is plausibility, P0A5B/P0A5C low and high. Without a valid reading the generator is disabled, so charging and engine start can be affected.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 59

Possible causes

  • Generator current sensor failed (usually inside the inverter) high
  • Sensor supply or signal line interrupted or shorted medium
  • Evaluation circuit on the generator control board faulty low

Symptoms

  • Hybrid warning and MIL
  • Engine runs constantly or the high-voltage battery is no longer charged
  • Vehicle may not enter ready mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A59

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication