OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A58

Drive Motor B Current Sensor Circuit High

P0A58 reports that the output of the drive motor B current sensor sits above its valid range, for instance from an open sensor ground, a short to the sensor supply or an internal fault that saturates the output. No manufacturer documents P0A58 publicly. Patents from Toyota and Hyundai show how motor controllers judge their current sensors: against fixed electrical limits, by comparing a control with a monitoring sensor, and by checking the zero-current offset. A reading pinned high would make the controller withdraw torque or trip overcurrent protection although nothing is wrong in the motor. CARB requires out-of-range checks for hybrid input components. P0A57 is the low side, P0A55 the general circuit fault, P0A56 plausibility, P0A54 the motor A equivalent.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 58

Possible causes

  • Sensor ground open or high resistance high
  • Signal line shorted to the sensor supply medium
  • Current sensor with saturated output medium

Symptoms

  • Hybrid warning and MIL
  • Drive motor B disabled, reduced power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A58

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication