P0A56
Drive Motor B Current Sensor Circuit Range/Performance
P0A56 means the current sensor of drive motor B delivers electrically valid values that do not match the operating state, for example a zero-current offset outside its band or a reading that disagrees with a redundant sensor. No manufacturer documents P0A56 publicly. A Hyundai patent covering both the traction motor and the starter-generator flags an abnormal offset compensation by comparing an estimated power-module temperature with the measured inverter temperature; a Caterpillar patent checks that the phase currents of a motor add up to roughly zero. CARB requires rationality checks of hybrid input components. P0A55 is the general circuit fault, P0A57/P0A58 the hard low and high signal, P0A52 the motor A counterpart. Motor B is limited or switched off.
Possible causes
- Current sensor offset drifted or offset learning disturbed high
- Current sensor of drive motor B degraded medium
- Electrical interference on the sensor signal low
Symptoms
- Hybrid warning and MIL
- Reduced or missing drive from motor B
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A56
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.