P0A52
Drive Motor A Current Sensor Circuit Range/Performance
P0A52 means the current sensor of drive motor A delivers values that are electrically valid but do not fit the operating state. Typical checks compare the reading at zero current with its expected offset, or compare redundant sensors with each other. No manufacturer documents P0A52 publicly. A Hyundai patent describes compensating the sensor offset while no current flows and declaring the compensation abnormal when the offset leaves its allowed band; a Toyota patent compares a control sensor with a monitoring sensor and flags a lasting difference. CARB requires rationality checks of hybrid input components. P0A51 is the general circuit fault, P0A53 and P0A54 the hard low and high signal. A wrong current reading can cause torque errors, so the system limits or disables drive motor A.
Possible causes
- Sensor offset drifted beyond the compensation range high
- Control and monitoring sensor disagree due to one degraded sensor medium
- Electrical interference or poor ground on the sensor signal low
Symptoms
- Hybrid system warning and MIL
- Reduced or jerky electric drive
- Drive motor A disabled, engine-only operation
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A52
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.