P0A4F
Generator Position Sensor Circuit Intermittent
P0A4F flags a generator resolver signal that drops out or jumps briefly and then recovers, as opposed to a steady fault. No manufacturer documents P0A4F publicly. Mitsubishi and Volvo handle short interruptions inside the general circuit code instead: Volvo lists P0A4B in its inverter generator module with the fault type intermittent, and Mitsubishi tells technicians to treat a resolver fault that cannot be reproduced as an intermittent malfunction of harness and connectors. CARB requires circuit continuity checks on hybrid input components. Loose terminals, fretting contacts, a chafed cable near moving parts or heat-related cracks are the usual suspects. P0A4B is the steady circuit fault, P0A4C plausibility, P0A4D/P0A4E low and high. Symptoms come and go, often with a brief loss of hybrid function.
Possible causes
- Loose or fretting terminals in the resolver connectors high
- Chafed resolver cable that breaks contact under vibration medium
- Heat-related cracks in wiring or solder joints low
Symptoms
- Hybrid warning that appears and clears again
- Short loss of electric drive or jerky power delivery
- Fault often linked to bumps or heat
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A4F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.