P0A4B
Generator Position Sensor Circuit
P0A4B covers the resolver that tells the inverter where the generator rotor stands; without a valid angle the generator cannot be commutated. Mitsubishi (Outlander PHEV 2023) runs the check continuously once the generator control unit has at least 8.0 V and sets P0A4B when its internal status flags stay failed for 0.23 s or 0.28 s; low and high signal levels go to separate codes there. Volvo lists P0A4B in the inverter generator module of its 2022-23 plug-in hybrids, as permanent or intermittent fault, with no-start complaints, and fixed false detections by software only. P0A4C is the plausibility check, P0A4D/P0A4E the low and high signal, P0A4F a sporadic signal, P0A50 overspeed. The driver sees a hybrid warning and may lose electric drive or engine start.
Possible causes
- False detection in the inverter monitor software (Volvo, fixed by update) medium
- Damaged resolver wiring or connector between generator and inverter high
- Generator resolver defective medium
- Resolver evaluation in the power drive unit faulty low
Symptoms
- Hybrid system warning and MIL
- Engine does not start or crank in hybrid mode
- Electric drive or charging by the generator disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A4B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.