P0A4A
Drive Motor B Position Sensor Circuit Overspeed
P0A4A reports that the speed calculated from the motor B resolver exceeds the motor's permitted maximum. Mitsubishi uses it for the rear motor of the 2023 Outlander PHEV: set at 12,500 rpm or more for at least 1 s with supply above 8 V, and only judged once the rear position sensor codes P0A45, P0A46, P0C57, P0C58, P0C61 and P0C62 are ruled out; otherwise the rear motor assembly is replaced, bearing damage being one listed cause. GM uses its own code P1B0E (above 11,500 rpm, Type A) for this check on the second motor of its two-mode trucks. CARB 1968.2 requires monitoring of electric drive components. P0A44 is the motor A twin. Expect the rear motor to be shut off to protect it, with less traction.
Possible causes
- Fault in the rear motor assembly, e.g. damaged bearing or control unit (Mitsubishi) medium
- Real overspeed from rear wheel spin on low grip medium
- Disturbed resolver signal producing a false speed value medium
Symptoms
- Rear electric drive shut off, front-wheel drive only
- Hybrid/EV warning and MIL
- Reduced acceleration in limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A4A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.