P0A49
Drive Motor B Position Sensor Circuit Intermittent
P0A49 covers short dropouts or jumps in the motor B resolver signal that are too brief to count as a lasting loss, low or high fault. No manufacturer documents this code publicly. The motor A twin P0A43 is used by Stellantis on the Pacifica Hybrid, where dealers must check bulletins and reflash the hybrid control processor before replacing the power inverter module. GM shows on the Bolt that a slightly spread resolver terminal can cause brief signal loss and a sudden loss of drive, and forbids splicing resolver connectors because the circuits are sensitive. CARB 1968.2 requires detection of intermittent circuit faults of drive components. P0A45 is the permanent fault. Expect a warning that may clear after a restart.
Possible causes
- Loose or spread terminal in the motor B resolver connector high
- Chafed or stretched resolver wiring near the rear axle or subframe medium
- Moisture in the connector causing intermittent leakage low
- Hybrid control software needing an update low
Symptoms
- Hybrid warning or MIL that comes and goes
- Brief loss of second-motor drive, often over bumps
- Code stored as history without current symptoms
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A49
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.