OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A48

Drive Motor B Position Sensor Circuit High

P0A48 reports a motor B resolver line reading above its allowed range, for example a sine, cosine or excitation wire shorted to a supply voltage, or an open coil whose line is pulled up by the input bias circuit until the converter clips. No manufacturer documents this code publicly. Mitsubishi handles high resolver voltages on the 2023 Outlander PHEV with its own codes (P0C53/P0C5D at 4.9 V or more on the front motor, P0C58/P0C62 on the rear), and Kia uses the motor A twin P0A42 on the Optima Hybrid. CARB 1968.2 requires circuit checks of electric drive components; Bosch patents describe detecting an open sine or cosine line and a short to supply. P0A47 is the low side. Expect a warning lamp and loss of motor B.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 48

Possible causes

  • Resolver line shorted to a supply voltage high
  • Open sine or cosine line pulled high by the input circuit medium
  • Corroded or loose terminals at the motor B resolver connector medium
  • Faulty resolver input stage in the motor control module low

Symptoms

  • MIL and hybrid system warning
  • Second motor disabled, reduced traction or power
  • Vehicle may not enter ready mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A48

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication