OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A47

Drive Motor B Position Sensor Circuit Low

P0A47 means a resolver signal of motor B is below its allowed range, typically from a sine, cosine or excitation line shorted to ground or a shorted coil. No manufacturer documents this code publicly. Mitsubishi files low resolver signals of the 2023 Outlander PHEV rear motor under its own codes instead: P0C57 for sine and P0C61 for cosine at 0.3 V or less for 0.18 s. Kia uses the motor A twin P0A41 on the Optima Hybrid and blames shorts or pin fit in the sub-harness. CARB 1968.2 requires circuit monitoring of electric drive components, and Bosch patents show how a ground short is told apart by line offset. P0A48 is the high side, P0A45 the general circuit fault. Expect a warning lamp and reduced motor B drive.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 47

Possible causes

  • Resolver sine, cosine or excitation line shorted to ground high
  • Poor pin fit or water ingress at the motor B resolver connector medium
  • Shorted resolver coil inside motor B low
  • Faulty resolver input stage in the motor control module low

Symptoms

  • MIL or hybrid service lamp
  • Second motor disabled, reduced traction or power
  • Fault may come and go with vibration or moisture

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A47

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication