OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A46

Drive Motor B Position Sensor Circuit Range/Performance

P0A46 reports that the motor B resolver still delivers a signal, but one that is degraded or not plausible. GM uses the same check as P0A40 for its second motor: sine or cosine above 4.0 V, with a failure counted when it persists for 0.2 to 0.4 s of a 2 s window (Type A, one trip in the 2011 and 2016 tables). Mitsubishi (2023 Outlander PHEV rear motor) sets P0A46 when its internal resolver status words A, B or C stay failed for 0.18 s, and replaces the rear motor assembly. A GM-related patent explains the idea: a degraded signal shows as a large mismatch between sine and cosine amplitudes. P0A45 is a full signal loss. Expect a hybrid warning and loss of motor B drive.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 46

Possible causes

  • Resolver of motor B delivering unequal or distorted sine/cosine signals high
  • High contact resistance or moisture in the resolver connector medium
  • Fault inside the rear motor assembly incl. bearing damage (Mitsubishi) medium
  • Damaged shielding letting inverter noise into the resolver lines low

Symptoms

  • Hybrid system warning and MIL
  • Rear or second motor disabled, reduced traction or power
  • Jerky torque delivery before the fault sets

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A46

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication