P0A45
Drive Motor B Position Sensor Circuit
P0A45 is the general circuit code for the resolver of the second traction motor (B), usually meaning its signal is missing. GM sets it like P0A3F when sine or cosine amplitude falls below 2.3 V (Type A, one trip). Mitsubishi uses it for the rear motor of the 2023 Outlander PHEV: both sine and cosine below 0.12 V for at least 0.18 s; the resolver is part of the rear motor assembly, which is replaced. Toyota fixes P0A45 on 2016-18 RAV4 Hybrid models built before a production change with a new frame wire harness, and Stellantis lists it for the Pacifica Hybrid. P0A46 to P0A49 split out degraded, low, high and intermittent signals. Expect a hybrid warning, MIL and loss of the motor B drive.
Possible causes
- Damaged or faulty frame/body wire harness to the rear motor (Toyota RAV4 Hybrid) high
- Poor contact at the motor B resolver connector medium
- Resolver or control unit inside the rear motor assembly failed (Mitsubishi) medium
- Hybrid control software needing an update (Stellantis) low
Symptoms
- MIL and hybrid system warning message
- Loss of rear-axle electric drive or all-wheel drive
- Reduced power or vehicle not ready
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A45
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.