P0A44
Drive Motor A Position Sensor Circuit Overspeed
P0A44 reports that the speed derived from the motor A resolver is above the highest speed the motor may run. Mitsubishi uses it on the 2023 Outlander PHEV front motor: set at 15,500 rpm or more for 0.5 s with module supply above 8 V, judged only when the position sensor itself is fault-free; the guided fix after other codes are ruled out is a new front motor. GM covers the same check under its own code P1B0D (above 11,500 rpm, Type A) instead of P0A44. A true overspeed can come from a slipping drivetrain or a mechanical fault; a false one from a corrupted speed signal. P0A3F to P0A43 cover the sensor circuit. The system cuts motor torque to protect the rotor.
Possible causes
- Mechanical fault in the front motor or its drivetrain (Mitsubishi replaces the motor) medium
- Real overspeed from wheel spin or a slipping coupling medium
- Disturbed resolver signal producing a false speed value medium
- Motor control module calculating speed incorrectly low
Symptoms
- Electric drive torque cut during acceleration or high speed
- Hybrid/EV system warning and MIL
- Reduced top speed in limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A44
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.