OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A43

Drive Motor A Position Sensor Circuit Intermittent

P0A43 is set when the motor A resolver signal drops out or jumps only briefly, so that neither a steady low, high nor a lasting loss is confirmed. Stellantis uses it on the Pacifica Hybrid: NHTSA files show P0A43-00 stored in the hybrid control processor next to P0A3F and P0A45, and a 2026 parts review tells dealers to check active bulletins and flash the hybrid control processor before ordering a new power inverter module. No public set threshold exists. GM's Bolt bulletin shows how a slightly spread connector terminal causes such short dropouts. P0A3F, P0A41 and P0A42 cover permanent faults. Expect a warning that may vanish after a restart, sometimes with a short loss of drive.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 43

Possible causes

  • Loose or spread terminal in the resolver connector, losing contact under vibration high
  • Hybrid control or inverter software needing an update (Stellantis) medium
  • Chafed resolver wiring making intermittent contact medium
  • Intermittent fault in the power inverter module low

Symptoms

  • Hybrid system warning or MIL that comes and goes
  • Brief loss of propulsion, normal again after restart
  • Code stored as history without current symptoms

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A43

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication