OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A3F

Drive Motor A Position Sensor Circuit

The rotor position of a traction motor is read by a resolver: one excitation coil and two pickup coils that return sine and cosine signals. P0A3F is the basic circuit code for motor A and mostly means the signal is gone. GM sets it when the sine or cosine amplitude drops below 2.3 V (Type A, one trip in the 2011 and 2016 tables); Mitsubishi (2023 Outlander PHEV front motor) watches the excitation voltage and fails it outside 1.0 to 2.86 V for 0.14 s. Field causes: a spread terminal at the X2 connector of the Chevrolet Bolt, low 12 V supply on the 2014 Subaru XV Crosstrek Hybrid (software fix), Stellantis Pacifica Hybrid. P0A40 covers a degraded signal. Expect lost propulsion or no electric drive.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 3F

Possible causes

  • Spread or poorly seated terminal at the resolver connector (documented on the Chevrolet Bolt) high
  • Open or shorted excitation, sine or cosine wire between motor and inverter medium
  • Low 12 V auxiliary battery voltage disturbing the motor control module (Subaru, fixed by reprogramming) medium
  • Resolver coil failed inside the motor low
  • Faulty resolver excitation or input stage in the inverter/motor control module low

Symptoms

  • Sudden loss of propulsion, sometimes normal again after a restart
  • MIL and hybrid/EV system warning on
  • Vehicle will not enter ready mode or electric drive is disabled

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A3F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication