OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A3D

Drive Motor B Inverter Over Temperature

P0A3D is the over-temperature code for the inverter feeding drive motor B. On the 2023 Outlander PHEV this is the rear motor control unit, and Mitsubishi sets the code when its IGBT temperature is 156 °C or higher for one second. Mitsubishi's hints list the rear motor assembly, the electric water pump driven by the PHEV-ECU, the EV coolant circuit and the radiator fan, so cooling problems come before electronics. No other manufacturer documents P0A3D publicly; CARB 1968.2 requires monitoring of hybrid components that affect emissions. P0A35 is the over-temperature of motor B itself, P0C14 to P0C16 phase-specific inverter codes and P0A79 the general inverter performance code. Rear drive power is reduced until the inverter cools down.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 3D

Possible causes

  • Electric water pump of the EV cooling circuit failed high
  • Low coolant or air in the EV cooling circuit medium
  • Radiator fan not running or radiator blocked medium
  • Internal fault in the rear motor and inverter assembly low

Symptoms

  • Hybrid or EV system warning
  • Reduced rear-axle drive power
  • Fault appears after long climbs or high load

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A3D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication