OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0A3C

Drive Motor A Inverter Over Temperature

P0A3C reports overheating of the inverter that powers drive motor A, usually measured at its IGBT power switches. Mitsubishi sets it on the 2023 Outlander PHEV when the front motor control unit reads 166 °C or more at the U-phase upper IGBT for 0.12 s; other switch positions have their own P30xx codes. Honda calls it motor control module overheating and lists it among the codes caused by a cracked solder joint in the 2012-15 Civic Hybrid motor power inverter, covered by a warranty extension. On the 2023-25 Accord Hybrid and 2025-26 Civic Hybrid, Honda links it to a PCU radiator damaged by road debris. P0A78 is the general inverter performance code, P0C11 to P0C13 are phase-specific. Power is cut to protect the inverter.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberA / 3C

Possible causes

  • PCU or inverter radiator damaged or leaking (Honda Accord/Civic Hybrid) high
  • Internal inverter defect such as a cracked solder joint (Honda Civic Hybrid 2012-15) medium
  • Low coolant or failed electric pump in the inverter cooling circuit medium
  • Radiator fan not running low

Symptoms

  • Hybrid system warning and check engine light
  • Strongly reduced drive power
  • Coolant loss from the inverter circuit

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0A3C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication