P0A39
Generator Temperature Sensor Circuit High
P0A39 is the high-side counterpart of P0A38: the generator temperature signal stays above the range a working sensor can deliver. Mitsubishi sets it on the 2023 Outlander PHEV when the generator W-phase coil sensor voltage reaches 4.93 V or more for at least 0.5 s. A voltage that close to the reference typically means the sensor circuit is open, a connector is unplugged or a terminal has lost contact, less often a short to a supply. Mitsubishi points to the power drive unit, the coil sensor in the generator and the harness. P0A37 handles implausible but in-range readings, P0A3B a real overheat. No other manufacturer documents P0A39 publicly. The system cannot protect the generator and limits its use.
Possible causes
- Open sensor circuit or unplugged generator connector high
- Spread or corroded terminals at the generator or power drive unit medium
- Generator coil sensor open internally medium
- Signal wire shorted to a supply voltage low
Symptoms
- Hybrid warning or check engine light
- Generator temperature shows a very low fixed value
- Generator output or series mode restricted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A39
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.