P0A38
Generator Temperature Sensor Circuit Low
P0A38 means the generator temperature signal has fallen below the range a healthy sensor can produce. Mitsubishi sets it on the 2023 Outlander PHEV when the voltage of the generator W-phase coil sensor is 0.1 V or less for at least 0.5 s while the generator control unit has at least 8 V supply. Such a low voltage usually comes from a signal wire shorted to ground or a shorted sensor; Mitsubishi lists the power drive unit, the generator coil sensor and damaged wiring or connectors as suspects. P0A39 is the matching high fault, P0A37 the plausibility check and P0A3B a genuine over-temperature. Mitsubishi is the only manufacturer found that documents P0A38. Expect a hybrid warning and restricted generator use.
Possible causes
- Sensor signal wire shorted to ground high
- Generator coil sensor shorted internally medium
- Damaged connector or harness between generator and power drive unit medium
- Faulty sensor input in the power drive unit low
Symptoms
- Hybrid warning or check engine light
- Generator temperature shows an implausibly high fixed value
- Battery charging by the engine restricted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A38
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.