P0A37
Generator Temperature Sensor Circuit Range/Performance
P0A37 tests whether the generator temperature reading is believable. Mitsubishi documents it for the 2023 Outlander PHEV: once per drive cycle, after at least 5,400 s of soak and with the inverter switched off, the generator W-phase coil temperature is compared with the front motor coil and with the oil temperature. A gap of 26 °C to the motor or 22 °C to the oil, held for 0.8 s, sets the code. Suspects are the power drive unit, the coil sensor inside the generator and the wiring. P0A38 and P0A39 are hard voltage faults of the same sensor, P0A3B the real over-temperature. Mitsubishi is the only manufacturer found that documents P0A37 publicly. The driver sees a warning and generator use may be limited.
Possible causes
- Generator coil sensor reading out of tolerance high
- Corroded connector or damaged harness in the sensor circuit medium
- Fault in the power drive unit that evaluates the sensor medium
- Comparison sensor (motor coil or oil temperature) reads wrong low
Symptoms
- Hybrid warning after the first start of the day
- Generator temperature differs from oil temperature after a long rest
- Generator operation possibly restricted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A37
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.