P0A36
Generator Temperature Sensor Circuit
P0A36 is the general circuit code for the temperature sensor in the hybrid generator, the machine that is mainly driven by the engine to produce electricity. It covers faults the module detects on the sensor line without classing them as low, high or implausible. No manufacturer documents P0A36 publicly; Mitsubishi (2023 Outlander PHEV) monitors its generator coil sensor with the specific codes P0A37 to P0A39 instead. CARB 1968.2 requires circuit monitoring for hybrid components that can affect emissions. With the generator temperature unknown, the system cannot protect the windings, so it usually restricts generator output and series operation and shows a hybrid warning.
Possible causes
- Loose or corroded connector between generator and its control unit high
- Damaged sensor wiring near the transaxle medium
- Generator coil thermistor failed (usually replaced with the generator) medium
- Faulty input in the generator control unit low
Symptoms
- Hybrid warning or check engine light
- Generator output or battery charging restricted
- Generator temperature missing or implausible in live data
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A36
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.