P0A31
Drive Motor B Temperature Sensor Circuit Range/Performance
P0A31 checks whether the motor B temperature reading makes sense, typically after a long rest when all parts should be close to the same temperature. GM compares it with other temperatures: the 2011 tables flag a gap above 20 °C to the average of power-electronics coolant and transmission fluid after 6 h without propulsion (Type A); the 2013 two-mode trucks allow 28 °C against the inverter module after 360 min key-off (Type B, two trips). Mitsubishi (2023 Outlander PHEV rear motor) compares two coil sensors after 5,400 s soak and sets it at 13 °C difference. P0A32 and P0A33 cover hard circuit faults; P0A35 is only judged while this test passes. Expect a hybrid warning and limited electric drive.
Possible causes
- Motor B thermistor reading drifted out of tolerance high
- Corroded terminals adding resistance in the sensor circuit medium
- Comparison sensor (inverter, coolant or fluid temperature) is wrong low
- Uneven cooling of the drive unit, e.g. low fluid level low
Symptoms
- Hybrid warning light after a cold start
- Motor B temperature differs clearly from other temperatures after a long rest
- Electric drive limited as a precaution
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0A31
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.